Job Vacancies for you

Reference Number	0136
Title	Instrument Engineer
Department	Production Directorate
Reporting To	Maintenance Team Leader
Location	Nogliki (Onshore Processing Facility)

Accountabilities:

be a designated member of the ERT (Emergency Response Team) in the function that the employee in this position is appointed to fulfil;
fire fighting and OSR equipment is maintained as per Instrument Maintenance Management procedures;
undertake emergency response as part of a Non-professional Emergency Response Team (NERT) implementing duties in accordance with relevant SEIC standing orders and Emergency Response Procedure;
participate in continuous improvement programmes in the search for operations excellence;
supervise subordinates and MMSC (maintenance and modernisation services contractors) services in execution of all instrument maintenance activities of the OPF;
interact with state supervision and control authorities;
take immediate measures towards elimination of equipment failures and assist with the diagnosis and resolution of maintenance or operational problems;
fulfil requirements for improvement of instrumentation maintenance organisation by establishing development plans and recruit and develop skilled staff;
fulfil his duties in case of emergency callout;
assist or participate in studies on maintenance aimed at risk reduction, studies and analysis of the main causes of failures, etc.;
ensure update of the instrumentation maintenance documentation and as-built documents and their compliance with the requirements of the Russian Federation;
provide input to the OPF Opex and Capex budgets;
act as a mentor;
repair and maintenance of instrumentation and control devices both at the operating facilities of the Company and in the shop laboratories;
study new instrumentation and control automation types and devices and training of the shop area staff in competent operation of these devices;
prevention of faulty production and downtimes and at elimination of their causes.

Job requirements:

Experience and Qualifications required:

higher professional education;
work experience under the speciality shall be 10 years.

Professional Skills and Competencies:

Shall have the knowledge of:

resolutions, instructions, orders and other guiding, methodological and normative documents on operation, maintenance and repair of instrumentation and control equipment;
development prospects of the instrumentation diagrams and systems;
fundamentals of metrology, goals and objectives of metrological provision;
organisation of equipment repair and maintenance;
system of planned preventive maintenance and rational operation of instrumentation equipment;
technical specifications, design features, equipment function and operating principles, rules for technical maintenance;
maintenance and repair planning principles;
procedure for execution of requests for equipment, materials, spare parts and tools;
labour remuneration provisions;
fundamentals of economics, organisation of production, labour and management;
fundamentals of labour legislation;
PM module of SAP;
labour and industrial safety, environmental and industrial sanitation provisions, rules and guidelines;
rules and norms of fire safety.

How To Apply

Please submit your resume in English and Russian by mail or e-mail (please indicate the position you apply for, mention the reference number) at the following address:

Recruitment Team
e-mail: jobs@sakhalinenergy.ru

Sakhalin Energy Investment Company Ltd.
Russia, 639000, Yuzhno-Sakhalinsk
35, Dzerzhinskogo St.
tel.: (4242) 66 20 00
fax: (4242) 66 26 16

Please note that only short-listed candidates will be notified.

We may refer your resume for consideration for other vacancies in future.

Reference Number	0004
Title	Electrical Technician
Department	Production Directorate
Reporting To	Electrical Supervisor/ Engineer
Location	Sakhalin Island, Prigorodnoye, LNG Plant

Accountabilities:

perform preventative maintenance (PM) and corrective maintenance (CM) work on low- and high- voltage equipment, generators, motors, transformers, switchgear and power electronics associated with production and utility equipment on LNG, OET, TLU and water wells;
verify and document all electrical repair and PM work;
troubleshoot / diagnose [fault find] and repair electrical equipment / installations [eg lighting] and DB systems used on production process and utility areas;
maintain up-to-date knowledge of electrical systems and equipment by reference to technical journals, books, operating manuals, and other reference materials;
report daily activity, provide input to safety meetings, and report any defects or deviations to supervisor as well as in computerised maintenance management system (SAP);
ensure the reliability and integrity of the plant equipment and systems such that all activities and work are carried out safely and properly in accordance with established policies, standards and procedures;
isolate and de-isolate end users, such as electric motors, heat tracing, etc.;
perform switching operations on low- and -high voltage distribution systems;
be fully conversant with SAP PM to be able to use the systems to co-ordinate and execute work and ensure history data is entered and maintained;
ensure all electrical system documentation and software is kept up-to-date to maintain its integrity;
test run [with Operator present] motors that are reinstalled after overhaul work is completed;
promote a positive attitude towards maintaining and improving HSE performance;
make recommendations for changing PM schedules based on observed plant performance and failure modes;
undertake approved modifications to equipment with the agreement of the Electrical Support Engineers and in accordance with company procedures for plant change and project implementation;
ensure the efficient and effective installation, troubleshooting and commissioning of new projects;
complete assigned tasks including complete reinstatement of plant and leave the work site in a clean and tidy condition;
obtain material and equipment required to complete correctly all allocated tasks;
continually monitor and seek to improve the team’s performance, suggest, and where appropriate, implement cost saving to ensure the effective control of the maintenance budget;
report and advise the discipline supervisor of any abnormal or potential failure of equipment that could lead to unsafe conditions;
demonstrate a strong safety attitude;
respond to normal and abnormal operating conditions;
be part of a duty roster system;
train less experienced electrical technicians;
attend all mandatory RN and SEIC and other necessary training;
comply with the Engineering Technician Progression Program (ETPP).

Job requirements:

Experience and Qualifications required:

be certified to RF Electrical Safety Level 5;
higher professional education or specialised tertiary education and additional training in electrical engineering (specialisation power engineering);
the minimal previous work experience under the speciality shall be 7 years.

Key Competencies required:

fundamental operating principles of industrial process systems;
written and spoken English at B1 level and Russian as to communicate with Asset management, support engineers and operations teams;
all HSE requirements;
the basics of the electrical technology, telemechanics and electronics;
the structure of the electrical schematic of the electrical machine, devices, instrument devices, and automatic control units;
the methods of testing the electrical equipment, cable and air networks, whole electrical scheme of the installation and each parts as well, the rules of (remedial) maintenance of the electrical devices, measuring, welding and powered transformers, AC/DC converters, automatic controlling devices including schemes to control electric motors;
the principle of the work the electrical machines and devices when the process of the LNG and crude production takes place, and the rules of the calculation the energy in shunt capacitors;
engine and turbine controls (Frame 5 and Frame 7);
ENMC system operation and maintenance;
Microsoft Office suite;
computerised maintenance management system (SAP);
mentoring & Coaching;
working in a multi-cultural environment;
electric circuits;
circuits with cascade and parallel connection;
storage batteries and charging;
earthing and protection;
three-phase circuits;
three-phase AC synchronous machines;
electrical energy generation and distribution;
electromagnetic induction;
inductors and condensers in DC circuits;
single-phase circuits;
DC machines;
single-phase motors;
three-phase motors. Magnetism and electromagnetism;
principle of motor operation;
metering devices;
lighting;
transformers;
distribution devices;
control circuits;
power electronics;
all electrical procedures part of CMS as well as other general procedures;
RF rules and regulations;
preparing witching programmes;
be certified to perform inspection on equipment suitable for use in areas where flammable atmospheres can occur.

How To Apply

Please submit your resume in English and Russian by mail or e-mail (please indicate the position you apply for, mention the reference number) at the following address:

Recruitment Team
e-mail: jobs@sakhalinenergy.ru

Sakhalin Energy Investment Company Ltd.
Russia, 639000, Yuzhno-Sakhalinsk
35, Dzerzhinskogo St.
tel.: (4242) 66 20 00
fax: (4242) 66 26 16

Please note that only short-listed candidates will be notified.

We may refer your resume for consideration for other vacancies in future.

If you would like to apply for any of the vacancies listed below or any future potential vacancies please send your CV (resume) or completed QNFS Application Form by e-mail to jobs@qnfs.biz or by fax to +974-4441-4981.
Also you can bring it personally to 4^th Floor, Jaidah Tower, Abdulla Bin Thani Street, Doha, Qatar

Vacancies

Position: Mechanical Supervisor - Job Decription

Utilises materials and resources competently; accurately and carefully follows established procedures for completing work tasks
Full utilisation of project equipment before seeking to hire equipment and then to minimise hire equipment time
Participate in the value creation system reviews processes to identify gaps between requirements and current outputs to identify opportunities to make improvements at work
Identify opportunities to improve best practice and implement.
Develop and confirm with the customer, work scopes for all planned and unplanned activities for all team members; to meet customer requirements and improve business efficiencies
Develop work pack scopes and communicate to field co-ordinators time estimates for completion
Allocate resources to maximise resource leveling on all planned and unplanned work
Negotiate with customers and priorities resource usage to deliver to the customer an agreed scheduled outcome
Ensure the compliance to obtaining of permits and ensure thorough understanding of permit procedure
Assist with planning and scheduling weekly maintenance program
To be capable of responding to unplanned problems such as equipment failure (breakdowns)
Equipment Terminology.
Ensure that all materials are used or processed in line with the legal regulations.
Understanding of tools and reporting through maintenance management systems regarding work progress.
Directly supervise a multi-skilled work group in accordance with established project procedures
Ensure effective execution of all maintenance activities to the client’s scope